Programming Manual References
None
Feature Guide References
None
VM DTMF Command—Switching to VM
Specifies
the DTMF command the PBX sends to the VPS to switch from AA Service Mode to VM Service Mode.
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
5.22 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Guide References
None
Timing—DTMF Length for VM
Specifies the length of DTMF signals the PBX sends to the VPS.
Value Range
80 ms, 160 ms
Maintenance Console Location
5.22 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Guide References
None
Timing—Inter-digit Time
Specifies the length of pause time between DTMF signals the PBX sends to the VPS.
Value Range
80 ms, 160 ms
660 PC Programming Manual
5.22 [3-8-1] VM(DTMF) Group—System Settings
To Next Page
Loading...
