Panasonic KX-NCP500 - Page 691

Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
1.19.2 Absent Message
Charge Limit
Specifies
the maximum limit of call charges allowed for the extension. When this limit is reached, the extension
cannot be used to make further trunk calls.
The number of decimal places that can be specified here depends on the value set in
Charge Options—
Digits After Decimal Point in 8.2 [6-2] Hotel & Charge.
Value Range
0–9999999
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
8.2 [6-2] Hotel & Charge
Feature Guide References
1.9.2 Budget Management
Intercom Call by Voice
Selects the method of receiving intercom calls. When Deny Voice Call is selected, the extension will always
ring when receiving calls, regardless of how the caller wants to make the call.
Value Range
Tone Call, Voice Call
, Deny Voice Call
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
1.5.3 Intercom Call
PC Programming Manual 691
6.1 [4-1-1] Wired Extension—Extension Settings