Tenant Number
Specifies the tenant number for the doorphone port in order to apply the Time Table (day/lunch/break/night).
Value Range
For KX-NCP500/KX-NCP1000
/KX-TDE100/KX-TDE200:
1–8
For KX-TDE600:
1–32
Maintenance Console Location
7.1 [5-1] Doorphone
Programming Manual References
4.6 [2-4] Week Table
Feature Guide References
1.17.1 Doorphone Call
2.2.3 Tenant Service
COS
Specifies the Class of Service (COS) number. COS programming determines the doorphone ports that are
able to make trunk calls, and sets restrictions on intercom calls from certain extensions (Internal Call Block).
Value Range
1–64
Maintenance Console Location
7.1 [5-1] Doorphone
Programming Manual References
4.12 [2-7-1] Class of Service—COS Settings—TRS—
TRS Level—Day, Lunch, Break, Night
4.14 [2-7-3] Class of Service—Internal Call Block
Feature Guide References
1.1.2.2 Internal Call Block
1.17.1 Doorphone Call
VM Trunk Group Number
Specifies
the number of the VM trunk group sent to the VPS when the doorphone call destination is the floating
extension number of a VM (DPT) group.
The VM trunk group number is used to allow the VPS to send the applicable greeting message to the caller.
814 PC Programming Manual
7.1 [5-1] Doorphone
To Next Page
Loading...
