EasyManua.ls Logo

Panasonic KX-NCP500 - Page 824

Panasonic KX-NCP500
1016 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
Programming Manual References
7.4 [5-3-2] Voice Message—DISA Message
Feature Guide References
1.28.4 Timed Reminder
Recording Mode
Specifies
the sound quality of messages recorded on the ESVM card when using it as an MSG card. Increasing
the recording quality reduces the total length of recording time available on the card.
To apply changes to this setting, follow the steps below:
1. Change this setting.
2. Set the status of the OPB3 card to "OUS", then "INS".
Value Range
Low: About 120 minutes of messages can be recorded per card.
Middle: About 60 minutes of messages can be recorded per card.
High: About 20 minutes of messages can be recorded per card.
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Guide References
1.17.7 Built-in Simplified Voice Message (SVM)
824 PC Programming Manual
7.3 [5-3-1] Voice Message—DISA System

Table of Contents

Other manuals for Panasonic KX-NCP500

Related product manuals