Feature Guide References
1.1.1.2 Direct In Line (DIL)
1.30.1 TIE Line Service
Tenant Number
Specifies
the tenant number, to determine the Time Table by which calls are distributed depending on the time
of day.
Value Range
For KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200:
1–8
For KX-TDE600:
1–32
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
1.1.1.2 Direct In Line (DIL)
2.2.3 Tenant Service
2.2.4 Time Service
VM Trunk Group No.
Specifies
the number of the VM trunk group sent to the VPS when the DIL destination is the floating extension
number of a VM (DPT) Group.
The VM trunk group number is used to allow the VPS to send the applicable greeting message to the caller.
Value Range
1–48
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
1.1.1.2 Direct In Line (DIL)
1.24.3 Voice Mail DPT (Digital) Integration
900 PC Programming Manual
12.2 [10-2] DIL Table & Port Settings
To Next Page
Loading...
