VM Trunk Group No.
Specifies
the number of the VM trunk group sent to the VPS when the DID destination is the floating extension
number of a VM (DPT) Group.
The VM trunk group number is used to allow the VPS to send the applicable greeting message to the caller.
Value Range
1–48
Maintenance Console Location
12.3 [10-3] DDI / DID Table
Programming Manual References
None
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.24.3 Voice Mail DPT (Digital) Integration
CLI Ring for DDI/DID—Day, Lunch, Break, Night
Enables CLI distribution in each time mode.
Value Range
Disable, Enable
Maintenance Console Location
12.3 [10-3] DDI / DID Table
Programming Manual References
8.1 [6-1] System Speed Dial
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.1.1.5 Calling Line Identification (CLI) Distribution
910 PC Programming Manual
12.3 [10-3] DDI / DID Table
To Next Page
Loading...
