Programming Manual References
None
Feature Guide References
1.26.1.1 Station Message Detail Recording (SMDR)
LAN—New Line Code for Telnet
Specifies the new line code for a terminal emulator.
If the terminal emulator automatically feeds lines with a carriage return, select CR (Carriage Return).
If not, select CR + LF (Line Feed).
Value Range
CR + LF, CR
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Guide References
1.26.1.1 Station Message Detail Recording (SMDR)
RS-232C
Communication—Baud Rate
Specifies the data transmission speed from the PBX to the printer or personal computer.
To ensure stable transmission, when changing this setting to 57600 or 115200 bps, set
Communication
—Flow on this screen to Hardware.
Value Range
2400 bps, 4800 bps
, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
13.1 [11-1] Main—RS-232C—
Communication—Flow
Feature Guide References
1.26.1.1 Station Message Detail Recording (SMDR)
PC Programming Manual 933
13.1 [11-1] Main
To Next Page
Loading...
