Feature Guide References
2.4.3 Local Alarm Information
Daily Test Start Time—Minute
Specifies the minute of the PBX daily self check start time.
Value Range
0–59
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Guide References
2.4.3 Local Alarm Information
Error Log for Centralised VM—Network MSW Transmission (Counter)
Enables error information to be logged in the PBX if network message waiting information is deleted after
re-transmission is repeated for the number of times specified in
Network MSW Data Transmission for
Centralised VM Feature—Data Re-transmission : Repeat Counter in 11.2 [9-2] Network Data
Transmission.
Value Range
Disable, Enable
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
11.1 [9-1] TIE Table—
Enhanced QSIG Call Information (Activation Key Required)
11.2 [9-2] Network Data Transmission
—
Network MSW Data Transmission for Centralised VM Feature—
Data Re-transmission : Repeat Counter
Feature Guide References
1.30.5.2 Centralised Voice Mail
Error Log for Centralised VM—Network MSW Transmission (Buffer)
Enables
error information to be logged in the PBX if the quantity of network message waiting information being
re-transmitted is larger than the transmission buffer.
938 PC Programming Manual
13.1 [11-1] Main
To Next Page
Loading...
