Programming Manual References
None
Feature Guide References
None
CS Class
Specifies
the classification of each CS. This parameter can only be modified when Connection on this screen
is set to OUS.
Value Range
Sync Master CS1, Sync Master CS2, Sync Slave CS
Maintenance Console Location
13.6 [11-5] Air Synchronisation
Programming Manual References
None
Feature Guide References
None
Primary CS—Index
Specifies the number of the primary CS.
Value Range
1–32
Maintenance Console Location
13.6 [11-5] Air Synchronisation
Programming Manual References
None
Feature Guide References
None
Primary CS—Slot
Indicates the slot position of the primary CS (reference only).
PC Programming Manual 957
13.6 [11-5] Air Synchronisation
To Next Page
Loading...
