Panasonic KX-NCP500 - Page 979

• 3.35
[1-1] Slot—Port Property - PRI Port—Supplementary Service—
COLP, CLIR, COLR, CNIP, CONP,
CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, E911, 3PTY
• 4.9 [2-6-1] Numbering Plan
—Main—Features—
ISDN-FWD (MSN) Set / Cancel / Confirm
• 4.12 [2-7-1] Class of Service—COS Settings—CO & SMDR— CF (MSN)
Feature Guide References
1.21.1.5 Call Forwarding (CF)—by ISDN (P-P)
Call Forwarding (CF)—by QSIG
• 3.33 [1-1] Slot—Port Property - BRI Port—Supplementary Service— COLP, CLIR, COLR, CNIP, CONP,
CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY
• 3.35
[1-1] Slot—Port Property - PRI Port—Supplementary Service—
COLP, CLIR, COLR, CNIP, CONP,
CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, E911, 3PTY
Feature Guide References
1.30.4.3 Call Forwarding (CF)
—by QSIG
Call Forwarding (FWD)
• 4.9 [2-6-1] Numbering Plan—Main—Features—
FWD No Answer Timer Set
• 4.12 [2-7-1] Class of Service—COS Settings
– CO & SMDR— Call Forward to CO
– Manager— Group Forward Set
– Optional Device & Other Extensions
—
Remote Operation by Other Extension
• 5.1 [3-1-1] Trunk Group—TRG Settings—Main
–
CO-CO Duration Time (*60s)
– Extension-CO Duration Time (*60s)
• 5.13 [3-5-1] Incoming Call Distribution Group
—Group Settings—Group Log / Group FWD
• 6.1 [4-1-1] Wired Extension—Extension Settings—FWD / DND
• 6.3 [4-1-2] Wired Extension—FWD/DND
• 6.10 [4-2-1] Portable Station—Extension Settings—FWD / DND Reference
• 6.12 [4-2-2] Portable Station—FWD/DND
Feature Guide References
1.3.1.2 Call Forwarding (FWD)
Call Hold
• 4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
–
Recall—Hold Recall
– Recall—Disconnect after Recall
• 4.9 [2-6-1] Numbering Plan—Main—Features
– Call Hold / Call Hold Retrieve
– Call Hold Retrieve : Specified with a Holding Extension Number
– Hold Retrieve : Specified with a Held CO Line Number
• 4.18 [2-9] System Options
– Option 1—
PT Operation—Automatic Hold by ICM / CO / ICD Group key
– Option 1— PT Operation—Hold Key Mode
– Option 5— SLT—SLT Hold Mode
Feature Guide References
1.13.1 Call Hold
PC Programming Manual 979
Feature Programming References