Panasonic KX-NS1000 - Page 270

KX-NT265 (Software version 2.00 or later only)
To set the DS field value
To start programming
Press PROGRAM while
"Searching" is displayed.
PROG.
Press VOLUME to
select "QoS".
VOL
Press SP-PHONE. Press VOLUME to
select "Diffserv".
VOL
Press SP-PHONE.
To end programming
Press STORE.
Press HOLD until the
Menu screen is displayed.
HOLD
Press VOLUME to
select "DS (Enable)".
VOL
Press SP-PHONE.
Diffserv
0.0–7.7
Press SP-PHONE.
The IP-PT will reboot
and can then be
registered to the PBX.
270 Installation Manual
5.8.4 Setting Diffserv Parameters