Panasonic KX-NS1000 - Page 84

• To apply the channel expansion, the IP
-CSs (KX-NS0154 only) must be reset by changing their port
status from OUS to INS. (See "9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port
Property—Main—
Connection" in the PC Programming Manual.)
Installation in One
-look Network System
Activation Keys Master Unit Slave Unit
KX-NSE201 1 IP-CS channel
expansion
ü ü
KX-NSE205 5 IP-CS channel
expansion
KX-NSE210 10 IP-CS channel
expansion
KX-NSE220 20 IP-CS channel
expansion
Feature Guide References for Related Features of Activation Keys
5.2.6 IP-CS (KX-NS0154)
Networking
Model No. Activation Key Type Description
Maximum Activation Keys
Stand-alone
System
One-look
Network
KX-NSN001 One-look Network Allows the use of multi-site
connections using One
-look
network feature.
-
16 activation
keys
*1
KX-NSN002 QSIG Network Allows the use of enhanced
QSIG network features (NDSS,
Centralised Voice Mail, etc.).
1 activation key
*1
This activation key must be installed to each PBX in the One
-look network.
Installation in One-look Network System
Activation Keys Master Unit Slave Unit
KX-NSN001 One-look Network
ü ü
KX-NSN002 QSIG Network
ü
-
Feature Guide References for Related Features of Activation Keys
One-look Network
4.2.1 One-look Networking Overview
QSIG Network
• 4.3.1.4 Common Extension Numbering for 2 PBXs
• 4.3.2.2 Common Extension Numbering for Multiple PBXs
• 4.3.5 QSIG Enhanced Features
84 Installation Manual
3.1.1 Type and Maximum Number of Activation Keys