Panasonic KX-TD500 - Page 101

Station Programming
User Manual 101
For KX-T7431 and KX-T7433 users
To store a number
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
7431/7433
Press STORE.
Enter the desired number
(extension number,
phone number, etc.).
desired number
Enter a station speed dial
number (0 through 9).
station speed dial no.
AUTO DIAL
STORE
Dial .
The STORE indicator lights.
The display shows the initial
programming mode.
Up to 24 digits, consisting of 0 through 9, , #, FLASH, PAUSE, INTERCOM, (“[”
or “]” : secret) and CONF (-:hyphen), can be stored.
To store the telephone number of an outside party, the line access code (9 or 801
through 848) must be stored as the leading digit.
To erase the line, press the CLR (S2) button or TRANSFER button.
— CLR (S2) button: for KX-T7433 users
— TRANSFER button: for KX-T7431 users
To store a name, press the NEXT(S3) button (KX-T7433) or MODE button (KX-
T7431) and go to step 4 in “To store a name” as described in the following procedure.
The STORE indicator light turns off.
The display shows the current status.
(If nothing is stored, “Not Stored” is displayed.)
<PT Display Example>
(—Outside number, 123-4567,
is now programmed.)
9-123-4567
CLR NEXT