Panasonic KX-TD500 - Call Log Incoming, Log Lock (KX-T7436; KX-T7433; KX-T7235; KX-T7230 Only)

Station Features and Operation (PT/SLT)
User Manual 471
4.5.5 Call Log Incoming, Log Lock (KX-T7436 / KX-T7433 / KX-
T7235 / KX-T7230 only)
Allows you to lock the display of your extension so that the "Call Log, Incoming" feature is
not shown on the display, if you do not want others to see the information.
Locking
Unlocking
Conditions
• This feature is available for KX-T7230, KX-T7235, KX-T7433 and KX-T7436 only.
• Call Log Lock Control, Incoming
The Manager or an Operator can unlock the call log display for any extension, if you forget
your lock code.
• With the KX-T7433, KX-T7436 or KX-T7235, you can execute this feature using the
display operation.
Programming Guide References
• 2.3 Numbering Plan
7230 / 7235 / 7433 / 7436
Lift the handset or press
SP-PHONE.
Hang up or press
SP-PHONE.
Enter the 3-digit lock code
(000 through 999) twice.
lock code lock code
same code
Confirmation tone
and dial tone
Dial 57.
5 7
<PT Display Example>
Log Locked :XXX
Lock code
7230 / 7235 / 7433 / 7436
Lift the handset or press
SP-PHONE.
Hang up or press
SP-PHONE.
Enter the same lock code
you used to lock the extension.
lock code
Confirmation tone
and dial tone
Dial 57.
5 7
<PT Display Example>
Unlocked