Panasonic KX-TD500 - Intercom Alert Assignment

Station Programming
User Manual 85
2.2.7 Intercom Alert Assignment
Allows you to select the alert mode (tone / voice) when receiving an intercom (extension) call.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• The default is "Ring-Calling (Tone Call)."
PT
Dial 4.
Press STORE.
or
Dial 1 or 2.
1 : to select the Ring-Calling (Tone Call) mode
2 : to select the Voice-Calling mode
14
2
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial programming mode.
<PT Display Example>
When Ring-Calling (Tone Call) mode is selected;
When Voice-Calling mode is selected;
Voice Call
Tone Call