Station Features and Operation (PT/SLT)
228 User Manual
4.3.22 Conference, 5-Party
A PT user can originate a 5-party conference call which includes outside or inside parties or
both in any combination.
To establish a 5-party conference
PT
Dial 52 .
<PT Display Example>
Repeat these steps
Dial extension/phone number
of the other party
extension / phone no.
You must dial a line access code (9 or 801
through 848) as the leading digit(s) when
calling an outside party.
52
Conference Start
Lift the handset or press
SP-PHONE/MONITOR.
Dial tone
The CONF indicator light begins to flash slowly in red.
The INTERCOM or DN indicator light turns green.
Talk to the
other party.
CONF
Press CONF.
The call is parked in the idle parking zone
with the smallest zone number.
CONF
Press CONF.
Confirmation
tone
All the calls you parked are retrieved from
the parking zones.
A 5-party
conference
is now established.
To Next Page
Loading...
