Panasonic KX-TD500 - Emergency Call

Station Features and Operation (PT/SLT)
User Manual 257
4.3.31 Emergency Call
Allows you to dial out a pre-assigned emergency number after seizing a CO line regardless of
the restrictions imposed on your extension. Up to 10 emergency dial numbers can be stored in
the system.
Dialing
Conditions
• The emergency number "911" is already stored at the factory. System Programming is
required to store other emergency numbers.
• Making an emergency call is allowed even in the following cases;
— in Account Code – Verified (All Calls, Toll Restriction Override) mode
— in any toll restriction level
— in Electronic Station Lockout / Remote Station Lock
• If your KX-TD500 System is connected to a host PBX as a behind PBX, you must dial the
host PBX line access code after dialing the line access code and it must be included as the
first digit of the emergency number.
Programming Guide References
• 5.4 Emergency Dial Code
Features Guide References
1.6 Originating Features
• Emergency Call
User Manual References
None
Lift the handset or press
SP-PHONE/MONITOR.
Dial the line access code
(9 or 801 through 848).
line access code emergency no.
Dial the emergency number.
Dial tone
You may press a CO button instead.
PT and SLT