Panasonic KX-TD500 - Call Waiting Tone Type Assignment

Station Programming
User Manual 57
2.2.2 Call Waiting Tone Type Assignment
Allows you to select the call waiting tone type (Tone 1 or Tone 2).
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• The tone type patterns are described in Section "6 Appendix."
• The default is "Tone 1."
PT
Dial 5.
Press STORE.
or
Dial 1 or 2.
1 : to select Call Waiting Tone 1
2 : to select Call Waiting Tone 2
AUTO DIAL
STORE
5
1
2
The STORE indicator lights.
The display shows the initial programming mode.
The display shows the current tone type.