Panasonic KX-TD500 - Account Code Entry

Station Features and Operation (PT/SLT)
User Manual 159
4.3.2 Account Code Entry
An Account Code (max. 10 digits) is used to identify incoming and outgoing CO calls for
accounting and billing purposes. The account code is appended to the "Station Message Detail
Recording (SMDR)" call record. For incoming CO calls, account code entry is optional. For
outgoing CO calls, you may be required to enter an account code. This depends on your
Account Code Entry mode determined by System Programming on a "Class of Service
*1
" basis.
Entering account codes before dialing
*1
Class of Service (COS) is used to define the features which are allowed for a group of extensions.
7230 / 7235 / 7433 / 7436
Confirmation tone
and dial tone
phone no.
Dial the phone
number.
Press CO.
Press ACCNT (S3).
Dial #.
CO
ACCNT
S1
S2
S3
account code
Enter an account code
(10 digits max., 0...9).
Dial tone 3*
<PT Display Example>
One of the dial tones. Refer to the
"Tone List" in the Appendix.
*
Enter ACCNT Code
PT and SLT
account code
Enter an account code
(10 digits max., 0...9).
Confirmation tone
and dial tone
For PT: Press Account
(flexible button).
For SLT, PT: Dial 49.
Lift the handset or press
SP-PHONE/MONITOR.
Press CO or enter a line
access code
(9 or 801 through 848).
Dial the phone number.
phone no.
line access code
Dial tone 3*
For SLT, PT
For PT
CO
4 9
If you dial a feature number,
you hear no tone.
(Account)
Dial #.
One of the dial tones. Refer to the "Tone List" in the Appendix.
*
Lift the handset or press
SP-PHONE/MONITOR.