Panasonic KX-TD500 - Single-CO (S-CO) Button (Assignment)

DSS Console Features
522 User Manual
5.2.17 Single-CO (S-CO) Button (Assignment)
You can assign a DSS button as a Single-CO button.
—Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
—To exit the Station Programming mode: Press [PROGRAM].
Conditions
• You can assign the same CO line to an S-CO and a G-CO button respectively.
• An S-CO button assigned to a DSS button is available for monitoring the call activity only,
not available for making and receiving a call.
PT and DSS Console
The STORE indicator lights.
The display shows the initial
programming mode.
<PT Display Example>
<PT Display Example>
(-xxxxx: trunk port physical number)
To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the Station
Programming mode.)
CO—
CLR
CO—xxxxx
CLR
Dial 0. Enter the trunk port physical
number.
0
trunk port physical number
Press the desired
DSS button.
[DSS Console] [Paired telephone]
Press STORE.
AUTO DIAL
STORE
[Paired telephone][Paired telephone]
(DSS)