Panasonic KX-TD500 - Group-CO (G-CO) Button (Assignment)

DSS Console Features
User Manual 513
5.2.8 Group-CO (G-CO) Button (Assignment)
You can assign a Flexible DSS button as a Group-CO button.
—Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
—To exit the Station Programming mode: Press [PROGRAM].
Conditions
• A G-CO button assigned to a DSS button is available for monitoring the call activity only,
not available for making and receiving a call.
PT and DSS Console
The STORE indicator lights.
The display shows the initial
programming mode.
To erase an incorrect entry, press the CLR (S2) button or the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the Station Programming mode.)
<PT Display Example>
TRK GRP-
CLR
Dial #. Enter the trunk group
number (01 through 48).
trunk group no.
Press the desired
DSS button.
(DSS)
[DSS Console] [Paired telephone]
Press STORE.
AUTO DIAL
STORE
[Paired telephone]
[Paired telephone]