Panasonic KX-TD500 - PDN;SDN Button Delayed Ringing Assignment

Station Programming
User Manual 87
2.2.9 PDN/SDN Button Delayed Ringing Assignment
Allows you to assign a delayed ringing function on the PDN/SDN button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• If more than one PDN button is assigned on a PT, Delayed Ringing can be set to the first
PDN button (assigned to the CO 01) only. This Delayed Ringing setting applies to all PDN
buttons on the same PT.
<PT Display Example>
<PT Display Example>
If you want to change the delayed ringing type, enter another
type number again.
Immediate Ring
1-ring Delay
PT
Press PDN or SDN
you wish to assign the
delayed ringing function.
Dial 76.
or
Press STORE.
Enter the delayed ringing type
number (0 through 4).
-0: Immediate Ring
-1: 1-ring Delay
-2: 3-ring Delay
-3: 6-ring Delay
-4: No Ring
delayed ringing type no.
6
7
AUTO DIAL
(PDN) (SDN)
STORE
The STORE indicator lights.
The display shows the initial
programming mode.