Panasonic KX-TD500 - Direct Station Selection (DSS) Button (Assignment)

DSS Console Features
User Manual 511
5.2.6 Direct Station Selection (DSS) Button (Assignment)
You can assign the desired extension number to a DSS button.
—Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
—To exit the Station Programming mode: Press [PROGRAM].
PT and DSS Console
Dial 1. Enter the desired
extension number
(3 or 4 digits).
extension no.
Press the desired
DSS button.
(DSS)
[DSS Console] [Paired telephone]
Press STORE.
AUTO DIAL
STORE
[Paired telephone][Paired telephone]
<PT Display Example>
<PT Display Example>
(-xxxx:extension number)
• To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the
Station Programming mode.)
EXT–
CLR
EXT–xxxx
CLR
• The STORE indicator lights.
• The display shows the initial
programming mode.
1