Panasonic KX-TD500 - Monitoring an Outside Line Activity

DSS Console Features
536 User Manual
5.2.27 Monitoring an outside line activity
You can monitor the activity of an outside line by assigning an S-CO button (Section
5.2.17 Single-CO (S-CO) Button (Assignment)) or a G-CO button (Section 5.2.8 Group-
CO (G-CO) Button (Assignment)) or both.
Conditions
• This feature is not available for the DSS Console connected to a PLC or HLC card.
• This feature is available for the DSS Console connected to a DLC or DHLC card whose
LPR version is 1 or above.
• You can confirm the "LPR Version" <Section "1.2.4 Card Properties (DHLC/ESLC/DLC)"
in the Programming Guide>.