Panasonic KX-TD500 - Initial Display Selection

Station Programming
84 User Manual
2.2.6 Initial Display Selection
Allows you to select the initial display, Caller ID, CO line name or DID name which is shown
on the display when a call is received.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• The default is "Caller ID" mode.
PT
Dial 81.
Press STORE.
or
Dial 1, 2 or 3.
1 : for the Caller ID
2 : for the CO line name
3 : for the DID name
1 1
8
2
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial programming mode.
The display shows the
current display type.
or
3