Panasonic KX-TD500 - Pulse to Tone Conversion

Station Features and Operation (PT/SLT)
User Manual 359
4.3.64 Pulse to Tone Conversion
You can change the dialing mode from Pulse to Tone temporarily to access services such as
computer telephone services, Voice Mail, etc., that require a tone.
Conditions
• This feature works only for CO lines set to Pulse Dialing mode.
• You cannot change the dialing mode from Tone to Pulse.
Programming Guide References
• 4.2 Trunk Line
– Dial Type
Features Guide References
1.3 System Features
• Dial Type Selection
1.12 Conversation Features
• Pulse to Tone Conversion
User Manual References
None
Dial the phone number
(Pulse mode).
Dial #.
phone no. (Pulse mode)
Dial the desired number
(Tone mode).
desired no. (Tone mode)
PT and SLT