Panasonic KX-TD500 - Released Link Operation

Station Features and Operation (PT/SLT)
364 User Manual
4.3.67 Released Link Operation
When Released Link Operation is enabled by System Programming, you will be automatically
released from a call (extension, outside) after transferring it to the destination, if the destination
extension is idle. This feature simplifies the transfer operation by eliminating the need for
going on-hook or pressing the RELEASE button after transferring the call.
This feature is convenient for extension users, such as Operators, who handle a large volume
of calls.
Conditions
• Class of Service
Class of Service programming determines the extension that can perform this feature.
• Released Link Operation functions when transferring a call to the ordinary extensions or
floating extensions (extension group, incoming group, phantom extensions).
• If the destination party is busy, Camp-on Transfer is set by going on-hook.
•
The SLT extension user cannot establish a conference call, if "Released Link Operation" is
enabled by System Programming.
Programming Guide References
• 2.4 Class of Service (COS)
– Released Link Operation
Features Guide References
1.3 System Features
• Released Link Operation
PT and SL
T
For SLT
For PT
TRANSFER
For PT: Press TRANSFER.
For SLT: Flash the switchhook.
Confirmation tone
and dial tone.
extension no.
Dial the destination
extension number
(3 or 4 digits).
The other party is placed on
consultation hold.
Ringing starts at the destination extension(s).
The call is transferred.
During a conversation;