Station Programming
88 User Manual
2.2.10 Phantom Button Ringing On/Off Assignment
Allows you to assign a ringing On/Off function on a Phantom button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
<PT Display Example>
Ring On
PT
Press Phantom you
wish to turn On/Off the
ringing.
Dial 1or 2.
-1: Ring Off
-2: Ring On
or
Press STORE.
Press the same Phantom
again.
1
2
AUTO DIAL
(Phantom)
STORE
The STORE indicator lights.
The display shows the initial
programming mode.
The display shows
the current status.
To Next Page
Loading...
