User Programming
User Manual 109
Using the Overlay
A programming overlay is packed with the telephone at the factory. This overlay should be
used at all times in the programming mode since the functions of the telephone keys change in
the programming mode as follows: (The original functions are in parentheses.)
During Normal Operation During Programming
(PAUSE/PROGRAM) PAUSE/PROGRAM
(SP-PHONE) NEXT
(REDIAL) PREV (PREVIOUS)
(AUTO ANSWER/MUTE) SELECT
(FLASH) FLASH
(TRANSFER) CLEAR
(FWD/DND)
(CONF)
— /
(INTERCOM) SECRET
(AUTO DIAL/STORE) STORE
(HOLD) END
(Up/Down/JOG) Skip+/Skip-
To Next Page
Loading...
