Panasonic KX-TD500 - Page 132

User Programming
132 User Manual
Programming
Conditions
• Up to 1000 Caller ID Codes per tenant, 2000 per system, can be assigned.
• Program [007] "Caller ID Name Set" is used to give names to Caller ID Codes. If an ID
Code is given a name, the called party's telephone shows the name with the ID Code.
Display PT
Dial 006. Enter a location number
(000 through 999).
location no.
<To end:>
Press NEXT.
NEXT
<PT Display> <PT Display>
Location NO?→
To enter location number 000,
you can also press NEXT.
<PT Display Example>
000:Not Stored
Press END.
END
<To continue:>
Repeat these steps
Enter a Caller ID Number.
Caller ID Number
Press STORE.
Press NEXT or
PREV or SELECT.
Enter the desired
location number
(000 through 999).
location no.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new number.
006
006 CALLER ID #
NEXT
PREV
SELECT
STORE
[When SELECT is pressed]