Panasonic KX-TD500 - Page 135

User Programming
User Manual 135
Programming
Conditions
• Up to 1000 Caller ID Names per tenant, 2000 per system, can be assigned. Each name
corresponds to a Caller ID Code programmed by [006] "Caller ID Dial Set."
• A Caller ID Name cannot be assigned if the corresponding Caller ID Dial is not assigned.
• For entering characters, please refer to Section "2.2.17 Station Speed Dialing Number/
Name Assignment [KX-T7235/KX-T7431/KX-T7433/KX-T7436 only]."
Display PT
Dial 007. Enter a location number
(000 through 999).
location no.
<To end:>
Press NEXT.
NEXT
<PT Display> <PT Display>
Location NO?→
To enter location number 000,
you can also press NEXT.
<PT Display Example>
000:Not Stored
Press END.
END
<To continue:> [When SELECT is pressed]
Repeat these steps
Enter a Caller ID Name.
Caller ID Name
Press STORE.
Press NEXT or
PREV or SELECT.
Enter the desired
location number
(000 through 999).
location no.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new number.
007
007 CALLER NAME
NEXT
PREV
SELECT
STORE