User Programming
User Manual 139
Conditions
• There is a maximum of nine messages. Messages 1 through 6 are programmed at the factory
but can be changed. Each message has a maximum of 16 characters.
• For entering characters, please refer to Section "2.2.17 Station Speed Dialing Number/
Name Assignment [KX-T7235/KX-T7431/KX-T7433/KX-T7436 only]."
• You can enter a maximum of seven "%" characters per message which can be programmed
at each user's station. The extension user can enter 0 through 9, " " and "#" for the %
characters. If the user enters digits less than the number of "%" characters, it is
recommended to fill the remaining "%" characters with "#" or " ."
• To display parts of the message which have scrolled off the display, press or .
Features Guide References
1.17 Display Features
• Absent Message Capability
To Next Page
Loading...
