Station Features and Operation (PT/SLT)
150 User Manual
Notes
• If your telephone is not noted in the operating step box (ex. only "PT" is noted), this
means your telephone does not have the ability to execute that feature.
• If your telephone has the ability to perform several operations for one feature, you
can select the method according to your needs.
• In this manual, the default feature numbers are used to describe each operation and
illustration. Use the new programmed numbers if default feature numbers are
changed by System Programming.
• For Proprietary Telephone operations, all button illustrations are based on the model
KX-T7235.
Description of Symbols Used
In this section, many symbols are used. Most symbols do not need a description, but some
symbols do. They are as follows.
Lift the handset, or press the SP-PHONE or MONITOR button. (Off-hook)
Replace the handset, or press the SP-PHONE or MONITOR button. (On-hook)
Flash the switchhook on a Single Line Telephone.
Tones which vary depending on the condition (Please refer to Section
"6.1.3 Tone List").
To Next Page
Loading...
