Panasonic KX-TD500 - Page 161

Station Features and Operation (PT/SLT)
User Manual 161
• An account code can be up to 10 numeric digits (0 through 9). FLASH, PAUSE, etc., are
not allowed. After entering an account code, the delimiter "#" must be entered.
• Memory Dialing
An account code can be stored into Memory Dialing ("One-Touch Dialing," "System /
Station Speed Dialing"). The sequence to enter an account code into Memory Dialing is:
— [Feature Number] [Account Code] [#] [Line Access Code] [Phone Number]
•
Pressing the Account button (flexible button) while entering an account code cancels the
entry.
•
You cannot enter an account code during a call or while hearing a reorder tone.
•
Flashing the switchhook while entering an account code cancels the entry.
•
The delimiter "99" is available for rotary type SLTs only.
• Account button
The Account button can be used instead of dialing the feature number. It can be assigned to
a flexible (CO, DSS, PF) button by Station, User or System Programming.
Programming Guide References
• 2.3 Numbering Plan
– Account Code
• 2.4 Class of Service (COS)
– Account Code Mode
• 4.3 Extension Line
– CO Key
– PF Key
• 4.4 DSS Console
– DSS Key
– PF Key
• 5.6 Account Code
– Tenant No.
– Entry No.
– Code
– TRS Level
• 10.4 SMDR
– Print out Account Code