Station Features and Operation (PT/SLT)
214 User Manual
Conditions
• BSS / OHCA / Whisper OHCA
If an extension user dials "1" while hearing a busy tone, BSS or OHCA or Whisper OHCA
may be activated at the called extension.
This is determined by the following conditions.
• The call waiting tone is generated when a CO call, a doorphone call is received, or when an
extension caller executes Busy Station Signaling.
• Data Line Security
Setting Data Line Security temporarily cancels Call Waiting which has been turned on by
an extension user.
•
BSS, OHCA and Whisper OHCA do not function, if the other extension is a DN type PT.
•
Call Waiting Tone Selection
For PT users, two types of call waiting tones are provided to prevent them from missing the
tone. A Call Waiting Tone type can be selected either by Station or System Programming.
• Distinctive Dial Tone
When this feature is assigned to the extension, the extension user may hear a distinctive dial
tone (dial tone 2) after going off-hook depending on System Programming <Section 2.8
System Option, "15. Special dial tone after setting feature" in the Programming Guide>.
• With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature
using the display operation.
Programming Guide References
• 2.3 Numbering Plan
Calling extension Called extension
COS-OHCA
assignment
Call Waiting setting
OFF ON
0123
Disable ——— BSS BSS BSS
Enable ——— BSS OHCA
*1
BSS
*1
OHCA(Off-Hook Call Announcement ) is activated when the called extension is KX-T7130, KX-T7235 or
KX-T7436.
W-OHCA
*2
OHCA BSS
*2
Whisper OHCA is activated when both calling and called extensions are using one of the KX-T7400 series PTs.
To Next Page
Loading...
