Station Features and Operation (PT/SLT)
220 User Manual
b) CLIP number assigned to the extension line
The number stored in "[CLIP Number] Public/Private" <Section 4.3 Extension Line in
the Programming Guide>.
• CLIP Number for ISDN BRI Line
When you make an outside call using an ISDN BRI line, the number stored in "DN"
<Section 1.2.10 Card Properties (BRI) – SPID/DN in the Programming Guide> is displayed
on the telephone of the other party as the CLIP number.
In this case, above operations do not work.
• The CLIP number actually displayed on the telephone of the other party may be different
from the system programmed CLIP number depending on the contract with your ISDN
Service Provider.
• Disabling the CLIP service
You can choose whether to utilize the CLIP service or not before making an outside call
<Section 4.3.20 Calling Line Identification Restriction (CLIR) / Calling Name
Identification Restriction (CNIR)>.
Programming Guide References
• 1.2 Slot Assignment
• 1.8 BRI Port Assignment
• 1.9 PRI Port Assignment
• 2.3 Numbering Plan
– CLIP
• 4.2 Trunk Line
– Subscriber
• 4.3 Extension Line
– [CLIP Number] Public
– [CLIP Number] Private
• 4.7 ISDN Extension Line
– [CLIP Number] Public
– [CLIP Number] Private
Features Guide References
2.2 ISDN Originating Features
• Calling Line Identification Presentation (CLIP)
• Calling Line Identification Restriction (CLIR)
User Manual References
• 4.3.20 Calling Line Identification Restriction (CLIR) / Calling Name Identification
Restriction (CNIR)
To Next Page
Loading...
