Panasonic KX-TD500 - Page 222

Station Features and Operation (PT/SLT)
222 User Manual
To change the setting at any time for a particular call
Conditions
• If the presentation is enabled, the other party can check the caller's number/name before
answering the call.
Programming Guide References
• 2.3 Numbering Plan
– CLIR/CNIR
Features Guide References
2.2 ISDN Originating Features
• Calling Line Identification Presentation (CLIP)
• Calling Line Identification Restriction (CLIR)
• Calling Name Identification Presentation (CNIP)
• Calling Name Identification Restriction (CNIR)
User Manual References
• 4.3.19 Calling Line Identification Presentation (CLIP)
PT and SLT
Lift the handset or press
SP-PHONE/MONITOR.
Confirmation tone
and dial tone
Dial 591.
95 1
For SLT, PT
For PT
9
CO
trunk group no.
8
For SLT, PT
Dial tone
Talk.
Hang up or press
SP-PHONE/MONITOR.
phone no.
Dial the phone
number.
The display shows the phone number
The selected CO indicator light turns green.
For PT: Press CO.
For SLT, PT: Dial 9.
For SLT, PT: Dial 8 and the trunk
group number
(01 through 48).