Station Features and Operation (PT/SLT)
262 User Manual
To terminate one party and talk to the other
To leave the conference
Conditions
[General]
• Class of Service
Class of Service programming determines the extension that can perform this feature.
• Executive Busy Override Deny
It is possible for extension users to prevent this feature from being executed by another
extension user.
• This feature does not work if "Executive Busy Override Deny" or "Data Line Security" is
set at either one of two extensions or both of them.
• Confirmation tone
When a 2-party call is changed to a 3-party call and vice versa, a confirmation tone is sent
to all three parties. This tone can be eliminated by System Programming <Section 2.8
System Option, "8. Confirmation tone for Override, Barge-in, Conference and Privacy
Release" in the Programming Guide>.
• 3-party call 2-party call
During a 3-party conference call with an outside party and inside party, you can terminate
either one of two parties and talk to the other.
• Trunk Route Control
When the outside call made using a specific trunk is busy on another call, the Manager or
the Operators can join the existing outside call by dialing "2" after hearing a busy tone.
PT
Confirmation tone
(optional)
Press CO or INTERCOM
of the party to remain connected.
or
(CO) INTERCOM
PT
Hang up or press
SP-PHONE/MONITOR
.
The other two parties
continue their conversation.
To Next Page
Loading...
