Panasonic KX-TD500 - Page 267

Station Features and Operation (PT/SLT)
User Manual 267
Conditions
• Flash Time
The flash time must be assigned as required by the Centrex, host PBX or CO line.
•
FLASH Button Operation
Pressing the FLASH button on a PT results in either sending Flash signal or disconnecting
the current call.
This is determined by System Programming <Section 2.8 System Option, "3. FLASH
button operation while CO talking" and "4. FLASH button operation when "Don't release
the trunk" is selected at #3." in the Programming Guide>.
•
Memory Dialing
During outside calls, a FLASH stored in System Speed Dialing, Station Speed Dialing or
One-Touch Dialing works as External Feature Access, not as Flash (Disconnect Signal).
•
This feature does not function, if an SLT has a call on Consultation Hold.
Programming Guide References
• 2.3 Numbering Plan
– External Feature Access
• 2.8 System Option
– FLASH button operation while CO talking
– FLASH button operation when "Don't release the trunk " is selected at #3
• 3.2 Trunk Group
– Flash Time
– Max. Dial No. after EFA Signal
Features Guide References
1.3 System Features
• Host PBX Access
1.12 Conversation Features
• External Feature Access
• Flash
User Manual References
• 4.3.18 Call Waiting from Central Office
• 4.3.37 Flash