Station Features and Operation (PT/SLT)
User Manual 299
Calling back the message waiting notification sender
* One of the dial tones. Please refer to Section "6.1.3 Tone List."
Clearing all message waiting notifications left on your extension
* One of the dial tones. Please refer to Section "6.1.3 Tone List."
SLT with Message Lamp
PT
If there are more than one message
waiting notification left on your
extension, you can choose the desired
message sender (display PT only).
The message waiting notification is
cleared after the conversation.
Press MESSAGE, Another Extension
Message Waiting or the Phantom Extension
Message Waiting.
Lift the handset or press
SP-PHONE/MONITOR.
Talk.Dial tone 4*, when
a message has been
received at your
extension.
MESSAGE
Lift the handset or press
SP-PHONE/MONITOR.
Talk.
Dial tone 4*, when
a message has been
received at your
extension.
Dial 702.
7 0 2
The message waiting
notification is cleared after the
conversation.
MESSAGE MESSAGE
or or
(Another Extension
Message Waiting)
(Phantom Extension
Message Waiting)
PT and SLT with Message Lamp
All message waiting notifications are cleared.
Lift the handset or
press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.
Dial 700.
Dial tone 4*, when
a message has been
received at your
extension.
Dial your extension
number.
your extension no.
7 0 0