DPT Overview
User Manual 35
" " indicates that the feature is available.
Line Access Buttons
The following three types of CO buttons can be used to seize a CO line when making a CO call.
• Single-CO (S-CO) button
• Group-CO (G-CO) button
• Loop-CO (L-CO) button
Conditions
• A flexible CO button can be assigned as a Line Access Button (S-CO, G-CO or L-CO) by
Station, User or System Programming. Once a flexible CO button is assigned as a Line
Access Button, it provides the line status by lighting patterns and green/red indication.
Please refer to Section "1.1.7 LED Indication."
• You can set S-CO, G-CO and L-CO buttons on one Proprietary Telephone. Incoming and
outgoing calls on the line are shown on the button in the following priority.
S-CO > G-CO > L-CO
2WAY-TRAN (Two-Way Transfer)
†
LCS (Live Call Screening)
†
LCS (Live Call Screening) Cancel
†
DAY/NIGHT (Day/Night Switch)
Alarm
Answer
Release
Tone Through
Alert
*
1
Available for monitoring the call activity only.
*
2
Can only be assigned by User or System Programming.
*
3
Can only be assigned by System Programming.
† Available when the Digital Super Hybrid System is connected to a Digital Proprietary
Telephone capable Panasonic Voice Processing System (one that supports Digital
Proprietary Telephone [DPT] integration; e.g., KX-TVS100).
Button CO (PT) DSS (DSS) PF (PT/
DSS)
Features to be assigned
To Next Page
Loading...
