Panasonic KX-TD500 - Page 353

Station Features and Operation (PT/SLT)
User Manual 353
To answer a phantom extension call
Conditions
• A phantom number must be assigned by System Programming before assigning the
Phantom button by Station, User or System Programming.
• If several extensions have the same phantom extension number, they will ring
simultaneously.
• A maximum of 448 phantom numbers can be assigned by System Programming.
•
The Phantom button cannot be used for feature settings such as "Call Forwarding."
•
One-Touch Transfer by Phantom button
If Automatic Hold is enabled by COS programming, you can transfer the call without first
pressing the TRANSFER button, that is, simply by pressing a Phantom button.
•
An incoming CO call may come in on a Phantom button directly depending on System
Programming. In this case, a CO button (S-CO, G-CO or L-CO) or a PDN button associated
with the incoming CO call should be assigned on a PT.
Programming Guide References
• 2.4 Class of Service (COS)
– Automatic Hold
• 4.2 Trunk Line
– Destination – Day / Night / Lunch / Break
• 4.3 Extension Line
Lift the handset.
PT
While the Phantom button indicator light is flashing green, and INTERCOM button
associated with the incoming call is flashing green or CO/DN button associated with
the incoming call is flashing red;
Press Phantom
(flexible button).
Press CO or INTERCOM or DN associated
with the incoming call.
or or
(CO)(Phantom) (DN)
or
INTERCOM
SLT