Panasonic KX-TD500 - Page 362

Station Features and Operation (PT/SLT)
362 User Manual
Conditions
[General]
• Up to 24 digits (excluding the CO line access code) can be stored and redialed.
• " ," "#," "PAUSE," and "INTERCOM" (for secret dialing) are counted as one digit.
• If "Full One-Touch Dialing" feature is enabled at the extension, there is no need to go off-
hook, before pressing the REDIAL or SAVE button.
[Last Number]
• The memorized telephone number is replaced by a new one if at least one digit sent to a CO
line is dialed. Dialing a CO line access code alone does not change the memorized number.
•
If you hear a busy tone when attempting to redial, select another line and press the REDIAL
button.
[Saved Number]
• SAVE button
If the SAVE button is not provided on your PT, it is possible to assign a flexible button (CO,
DSS, PF) to be the SAVE button by Station, User or System Programming.
Programming Guide References
• 2.3 Numbering Plan
– Redial
• 4.3 Extension Line
– CO Key
– PF Key
• 4.4 DSS Console
– DSS Key
– PF Key
Features Guide References
1.7 Dialing Features
• Redial
1.16 Button Features
• Button, Flexible
User Manual References
• 2.2.3 Flexible Button Assignment