Station Features and Operation (PT/SLT)
User Manual 369
Conditions
• Class of Service (COS) programming
COS programming <Section 2.4 Class of Service (COS), "Busy Override" and "Secret
Busy Override" in the Programming Guide> determines the extension users who can
perform this feature.
• This feature does not work if "Executive Busy Override Deny" or "Data Line Security" is
set at either one of two extensions or both of them.
• Party A and Party B are in conversation.
This feature works as follows so that both party A and party B do not know that their
conversation is being monitored by Party C:
— The display and LED indicator at party A and party B show the status of a 2-party
conversation.
— A confirmation tone is not sent to either party A or party B even if it is enabled by System
Programming.
— The speech path from the party C to the party A and party B is not connected.
• If either one of two extensions or both of them is released from the call to perform other
operations such as making a call or placing it on hold, this feature is terminated and then a
reorder tone is sent to the calling extension.
Programming Guide References
• 2.3 Numbering Plan
– Data Line Security Set / Cancel
– Executive Busy Override Deny Set / Cancel
• 2.4 Class of Service (COS)
– Busy Override
– Busy Override Deny
– Secret Busy Override
• 2.8 System Option
– Confirmation tone for Override, Barge-in, Conference and Privacy Release
Features Guide References
1.6 Originating Features
• Secret Busy Override
1.9 Answering Features
• Executive Busy Override Deny
1.12 Conversation Features
• Data Line Security
User Manual References
• None
To Next Page
Loading...
