DPT Overview
User Manual 37
• When your extension is assigned as an incoming call destination for a CO line, you cannot
receive any incoming CO calls unless a G-CO, L-CO or S-CO button associated with the
CO line is assigned.
Programming Guide References
• 4.3 Extension Line
– CO Key
• 4.4 DSS Console
– DSS Key
Features Guide References
1.16 Button Features
• Button, Line Access
User Manual References
• 1.1.4 Feature Buttons
• 2.2.3 Flexible Button Assignment
• 3.2.5 [005] Flexible CO Button Assignment
• 4.3.54 Outward Dialing, Trunk Access
Loop-CO (L-CO) button
All CO lines can be assigned to a flexible CO button on a Proprietary Telephone. The assigned
button serves as an L-CO button. An incoming call on any CO line arrives at the L-CO button,
unless there are S-CO or G-CO buttons associated with the CO line or unless the button is
already in use. To make a CO call, you simply press the dedicated L-CO button. Pressing the
L-CO button provides the same operation as dialing the feature number for "Local CO Line
Access/ARS" (default = 9).
Programming Guide References
• 4.3 Extension Line
– CO Key
Features Guide References
1.16 Button Features
• Button, Line Access
To Next Page
Loading...
