Station Features and Operation (PT/SLT)
382 User Manual
• Distinctive Dial Tone
When this feature is assigned to the extension, the extension user may hear a distinctive dial
tone (dial tone 2) after going off-hook depending on System Programming <Section 2.8
System Option, "15. Special dial tone after setting feature" in the Programming Guide>.
• With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature
using the display operation.
• Alert button assignment
The Alert button can be assigned to a flexible CO button on the Alert extension.
• An Alert extension can be assigned for Day / Night mode per tenant respectively by System
Programming <Section 2.2 Tenant, "Alert Extension" in the Programming Guide>.
• Alert Ringing
A Timed Reminder alert can be sent to the alert extension when the extension user does not
respond to the Timed Reminder (wake-up call) by System Programming <Section 2.8
System Option, "65. Alert Ringing" in the Programming Guide>.
Installation Manual References
• 2.6.1 DISA Card (KX-T96191)
Programming Guide References
• 2.2 Tenant
– Alert Extension – Day / Night
• 2.3 Numbering Plan
– Timed Reminder Confirm / Set / Cancel
• 2.5 System Timer
–Timed Reminder Ringing Time
–Timed Reminder Arrive Count
–Timed Reminder Arrive Wait Time
• 2.8 System Option
– Special dial tone after setting feature
– Alert Ringing
• 3.6 OGM Group
– OGM Type
• 4.3 Extension Line
– CO Key
• 10.4 SMDR
– Print out Timed Reminder Information
• 10.7 System Time
To Next Page
Loading...
