Panasonic KX-TD500 - Page 462

Station Features and Operation (PT/SLT)
462 User Manual
Conditions
• This feature is available for KX-T7230, KX-T7235, KX-T7433 and KX-T7436 only.
• The SHIFT indicator light may turn on when receiving a call. Pressing this button provides
you with more information about the caller.
• If a CO line name is assigned, you can select the initial display, Caller ID, DID name or CO
line name by Station or System Programming.
• You can modify the logged numbers for callback purpose. Please refer to Section
"4.5.4 Call Log, Incoming (KX-T7436 / KX-T7433 / KX-T7235 / KX-T7230 only)."
• Caller ID or Call Duration
You can specify the initial display, Caller ID or Call Duration, which is shown on the
display PT when you answer a CO call by System Programming.
• Call Information Display feature is also available for KX-T7431 and display APTs.
However, the operation of KX-T7431 and display APTs is different from that of KX-T7230,
KX-T7235, KX-T7433 and KX-T7436. The KX-T7431 and display APTs user can switch
the display by pressing " " while receiving the Caller ID information.
Programming Guide References
• 2.5 System Timer
– Call Duration Count Start Time
• 2.8 System Option
– LCD Display Mode while CO Talking
• 4.2 Trunk Line
– Name
• 4.3 Extension Line
– DN
– Name
– Initial Display Selection
• 5.12 Caller ID Registration
Features Guide References
1.5 Attended Features
• Caller ID Service
1.17 Display Features
• Display, Call Information
User Manual References
• 2.2.6 Initial Display Selection
• 3.2.6 [006] Caller ID Dial Set
• 3.2.7 [007] Caller ID Name Set
• 4.5.4 Call Log, Incoming (KX-T7436 / KX-T7433 / KX-T7235 / KX-T7230 only)