Panasonic KX-TD500 - Page 497

Station Features and Operation (PT/SLT)
User Manual 497
System Feature List
You can access the following features which are displayed in alphabetical order. For more
details about the features and the required parameters, please refer to the respective features in
Section "4.3 Station Features and Operation" and Section "4.4 Operator / Manager Service
Features."
KX-T7431
1. Rotate the Jog Dial until the desired item is
displayed.
2. Press the SELECT Button.
3. Enter the parameter, if required.
4. On-hook, if required.
KX-T7433
1. Press the FEAT (S3) button.
2. Rotate the Jog Dial until the desired item is at
the arrow.
3. Press the SEL (S3) button.
4. Enter the parameter, if required.
5. On-hook, if required.
KX-T7436
1. Press the Features (F4) or FEAT (S3) button.
2. Rotate the Jog Dial until the desired item is at
the arrow.
3. Press the SEL (S3) button.
4. Enter the parameter, if required.
5. On-hook, if required.
Notes
• When using a KX-T7436, you can press the
Function button (F1 through F10) on the same
line of the desired item instead of the SEL (S3)
button.
• When using a KX-T7436, you can press the
Feature (F4) button in any display (initial
through third).
• Before rotating the Jog Dial, you can press the
corresponding alphabet key to select the desired
letter.
<Example> Press 2 twice to display "B" items.
Display
(KX-T7436/KX-T7235)
Display
(KX-T7431/KX-T7433)
Feature Description
Absent MSG Off ABST MSG Off Cancel the absent message.
Absent MSG On ( 1-9) ABST MSG On 1-9 Set an absent message.
BSY Out Cancel ( PHY) BSY Out Cancel Cancel the Trunk Busy-out
setting.*
1
BSY Out Confirm ( PHY) BSY Out Confirm Confirm the Trunk Busy-out
setting.*
1
BSY Out Set ( PHY) BSY Out Set Busy out a specific trunk.*
1