Station Programming
62 User Manual
Conference (CONF) Button (Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as a Conference (CONF) button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
PT
Press the desired Flexible (CO,
DSS, PF) button you wish to
assign as the Conference button.
Dial 70.
Press STORE.
AUTO DIAL
STORE
0
7
<PT Display Example>
The STORE indicator lights.
The display shows the initial programming
mode.
Conference
To Next Page
Loading...
