Panasonic KX-TD500 - Page 64

Station Programming
64 User Manual
Direct Station Selection (DSS) Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a DSS button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• DSS buttons are provided on a DSS Console without default setting. You can assign the
desired extension number or feature on each DSS button from the paired PT.
• You cannot enter non-existent extension numbers.
<PT Display Example>
<PT Display Example>
(-xxxx:extension number)
To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the
Station Programming mode.)
PT
Press the desired Flexible
(CO, DSS) button you wish
to assign as a DSS button.
Dial 1.
Press STORE.
Enter the extension number
(3 or 4 digits).
extension no.
AUTO DIAL
STORE
1
The STORE indicator lights.
The display shows the initial
programming mode.
EXT
CLR
EXT xxxx
CLR